General HPLC Accessories
Waters Corp PeptideWorks Refill Kit, Tryptic Protein Digestion, Automatable, RapiZyme Trypsin
This refill kit provides components for automatable, high-efficiency, and reproducible peptide mapping, achieving results four times faster than average home-brew methods. It supports both manual digestion and automated processes.
- Achieves automatable, high-efficiency, and reproducible peptide maps.
- Includes Mass Spectrometry (MS) grade RapiZyme Trypsin for rapid, clean, and complete digestions in 30 minutes without autolysis peaks.
- Contains 4 vials of RapiZyme Trypsin.
- Components for denaturation (Guanidine Hydrochloride), reduction (Dithiothreitol), and alkylation (Iodoacetamide) are provided.
- Supplied with Sep-Pak SEC Desalting Cartridges and 1M CaCl2 Salt Concentrate.
- Supports up to 96 protein digestion analyses.
Waters Corp Maintenance Kit, ACQUITY QDa Performance, KAD, Annual
This Performance Maintenance Kit is designed for ACQUITY QDa Standard (KAD serial numbers) instruments. It contains all the necessary quality parts to ensure the instrument operates at peak performance on an annual basis.
- Kit includes seals and gaskets, calibration pin, aperture disk assembly, air filters, and rotary pump maintenance materials.
- Ensures peak instrument performance when replaced annually.
- Supports various system types including HPLC, MS, and UPLC.
- Compatible with Arc Premier System, QDa Mass Detector, UPLC H-Class System, UPLC I-Class System, and Alliance HPLC System instruments.
- One unit per package.
Waters Corp CORTECS T3 Method Validation Kit, 120 Å, 1.6 μm, 2.1 x 30 mm
The CORTECS T3 Method Validation Kit is designed for method validation purposes. This kit includes three columns for comprehensive analytical method validation.
- Kit designed for method validation
- Includes three columns
- Column ID: 2.1 mm
- Column length: 30 mm
- Particle size: 1.6 μm
- Pore size: 120 Å
- Phase: CORTECS T3
- Phase type: AQ
- USP classification: L1
Waters Corp CORTECS Phenyl Method Validation Kit, 90Å, 2.7 μm, 2.1 mm × 150 mm, 3/pk
Waters CORTECS Phenyl Method Validation Kit, 90Å, 2.7 μm, 2.1 mm × 150 mm, 3/pk
Waters Corp CORTECS T3 Method Validation Kit, 120Å, 2.7 μm, 3 mm × 100 mm, 3 pk
CORTECS T3 method validation kits contain columns of three batches, compatible with 100% aqueous mobile phases. They offer excellent retention for polar and non-polar analytes. Particle morphology ensures high efficiency, lower backpressure, ultra-low column MS bleed, long lifetimes, and excellent peak shape. Digital COAs and eCords are online at www.waters.com/coa.
- Includes three column batches for method validation.
- Compatible with 100% aqueous mobile phases.
- Excellent retention for polar and non-polar analytes.
- High efficiency and lower backpressure (compared to fully porous particles).
- Ultra-low column MS bleed.
- Long lifetimes and excellent peak shape.
- Digital COAs/eCords online (www.waters.com/coa) for less waste.
Waters Corp CORTECS Phenyl Method Validation Kit, 90Å, 2.7 μm, 2.1 mm × 100 mm, 3/pk
CORTECS Phenyl method validation kits include columns from three different batches. These columns offer complementary selectivity to C18 stationary phases, providing high efficiency and lower backpressures compared to fully porous particles of similar size. They also offer ultra-low column MS bleed, long lifetimes, and excellent peak shape.
- Chemistry: Phenyl
- Separation mode: Reversed phase
- Particle substrate: Silica
- pH range: 2 to 8
- Maximum pressure: 18000 psi (1240 bar)
- Bonding technology: Phenyl-Hexyl
- Silanol activity: Low
- Particle shape: Spherical
- Particle size: 2.7 μm
- Endfitting type: Parker-style
- Pore size: 90 Å
- System: UPLC, UHPLC
- Particle technology: Solid Core
- USP classification: L11
- Inner diameter: 2.1 mm
- Length: 100 mm
- Carbon load: 5.9%
- Units per package: 3
Waters Corporation Ion Block Support Assembly, Replacement Part, Mechanical, MS
This is a replacement ion block support assembly designed for Waters mass spectrometers. It serves as a crucial mechanical component for various MS systems.
- Spare parts kit
- One unit per package
- Mechanical type
- For MS system type
- Replaced as required
- Compatible with Synapt G2-S, Synapt G2-Si, Vion, Xevo G2-S, Xevo G2-XS, Xevo TQ-S, and Xevo TQ-XS mass spectrometers.
Grainger MERSEN, Fuse, 12A 250V AC 5PK
The Mersen 12A Fuse is a fast-acting, high interrupting rating fuse designed to protect electrical circuits. This UL listed fuse has a voltage rating of 250VAC/DC and a current rating of 12 amps. The body size is 1/4" x 1-1/4" with brass end caps and a glass tube construction. It features a dual-element time-delay design for protection against short circuits and overloads. The fuse has a high interrupting rating of 200kA at 250VAC for safe interruption of high fault currents. It can be used in control panels, distribution panels, and motor controllers. This fuse provides reliable overload and short circuit protection for a variety of applications.
Waters Corp Tubing Assembly, Seal Wash to Accumulator, EFTE
This tubing assembly is designed for connecting the seal wash to the accumulator.
- Made from EFTE material.
- Functions as a spare parts kit.
Waters Corp CORTECS C8 Method Validation Kit, 90 Å, 2.7 μm, 4.6 x 50 mm
This Method Validation Kit is designed for rigorous method validation applications. It features a CORTECS C8 phase, optimized for efficient chromatographic separations.
- 90 Å pore size.
- 2.7 μm particle size.
- Kit contains 3 columns.
- Column dimensions are 4.6 x 50 mm.
- Complies with USP L7 classification.
Waters Corp Active PreHeater (APH), MP35N, .007 in ID x 23.5 in, with Gasket
Active PreHeater (APH), MP35N, .007 in ID x 23.5 in, with Gasket
Waters Corp Column, CORTECS C18+, 1.6 µm, 3 × 100 mm
CORTECS C18+ columns are general purpose, high efficiency C18 columns based on a solid-core particle that are designed to deliver excellent peak shape for basic analytes at low pH.
- General purpose.
- High efficiency.
- Solid-core particle technology.
- Designed to deliver excellent peak shape for basic analytes at low pH.
- Reversed phase separation mode.
- pH range of 2 to 8.
- Temperature limits up to 45°C.
- Maximum pressure of 18000 psi (1240 Bar).
- Endcapped.
- Low silanol activity.
- Spherical particle shape.
- Particle size of 1.6µm.
- Pore size of 90Å.
- Compatible with UPLC and UHPLC systems.
- Inner diameter of 3 mm.
- Length of 100 mm.
- Carbon load of 5.7%.
Waters Corp BioResolve SCX mAb Method Validation Kit, 3 μm, 2.1 mm x 100 mm, 3 pk
The BioResolve SCX mAb Method Validation Kit with VanGuard™ FIT provides reproducible, high–resolution, charged–based separations for mAbs and other proteins. It features corrosion–resistant columns with non–porous, polymer–based particles and sulfonic acid ligands, suitable for LC and LC–MS applications.
- Corrosion–resistant columns with non–porous, polymer–based particles.
- Grafted with negatively charged sulfonic acid ligands for high–resolution separations.
- Ideal for LC and LC–MS applications using salt or pH gradient methods.
- Includes VanGuard™ FIT to maximize column life and preserve biomolecule resolution.
- Contains three columns from three distinct batches for method validation.
